Search found 69 matches

by zazz
Fri Jul 10, 2020 4:42 am
Forum: Windows Discussion Forum
Topic: Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .
Replies: 6
Views: 6538

Re: Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .

It started with SW2018... I have tried most drives from 2017 till a few months ago and all have the same issue. All works beautifully in the 3DC's own 3D-viewer, but works crap with Solidworks
by zazz
Mon Jul 06, 2020 8:57 am
Forum: Windows Discussion Forum
Topic: Mayor drop in Solidworks Graphic performance using SpaceMouse Pro
Replies: 4
Views: 4319

Re: Mayor drop in Solidworks Graphic performance using SpaceMouse Pro

You see, They don't even bother to answer this thread. Sell the crap and use a good mouse instead... I have one with 16 buttons and it have taken over the Space mouse's tasks and there is no lag
by zazz
Mon Jul 06, 2020 8:50 am
Forum: Windows Discussion Forum
Topic: Jerky graphics with Space pilot PRO on Solidworks
Replies: 21
Views: 30171

Re: Jerky graphics with Space pilot PRO on Solidworks

Berno wrote: Fri Jul 03, 2020 3:46 pm Same problem. Did anyone here solve this issue?
Neither 3DC or Solidworks seems to give a shit about it... I have had these problems since 2018...
by zazz
Tue Nov 19, 2019 11:29 pm
Forum: Windows Discussion Forum
Topic: Jerky graphics with Space pilot PRO on Solidworks
Replies: 21
Views: 30171

Re: Jerky graphics with Space pilot PRO on Solidworks

I have tried with 4 different mice and with no mouse at all. with no noticeable differences. Changing the mouse frequency does not affect the Spacemouse Pro's performance as long as the mouse is not moving. But it does affect the middle mouse rotation drastically. 1000-250HZ rotates the model nicely...
by zazz
Mon Nov 18, 2019 5:25 am
Forum: Windows Discussion Forum
Topic: Mayor drop in Solidworks Graphic performance using SpaceMouse Pro
Replies: 4
Views: 4319

Re: Mayor drop in Solidworks Graphic performance using SpaceMouse Pro

I forgot to mention that spinning it with the middle mouse button it get 80-100% GPU utilization (P4000 Quadro) in the same setup.
by zazz
Mon Nov 18, 2019 1:14 am
Forum: Windows Discussion Forum
Topic: Jerky graphics with Space pilot PRO on Solidworks
Replies: 21
Views: 30171

Re: Jerky graphics with Space pilot PRO on Solidworks

No, the 10.4.3 driver did not change anything
by zazz
Mon Nov 18, 2019 12:31 am
Forum: Windows Discussion Forum
Topic: Jerky graphics with Space pilot PRO on Solidworks
Replies: 21
Views: 30171

Re: Jerky graphics with Space pilot PRO on Solidworks

Do you have same problem as me?

Note that right-clicking on the icons the issue disappears. I will try the driver 10.4.3 suggested here earlier.

https://streamable.com/eich4
by zazz
Sun Nov 17, 2019 7:36 am
Forum: Windows Discussion Forum
Topic: Mayor drop in Solidworks Graphic performance using SpaceMouse Pro
Replies: 4
Views: 4319

Mayor drop in Solidworks Graphic performance using SpaceMouse Pro

Hi, My SpaceMouse Pro has been a headache as long as i have owned it. The ide is good but it has never worked as intended with Solidworks. But some one may have solution for the most enjoying problem. I loose about 3/4 of the graphical performance while using the SpaceMouse Pro. But right-clicking o...
by zazz
Mon Sep 02, 2019 6:05 am
Forum: Windows Discussion Forum
Topic: SpaceMouse Pro moves erratically in Solidworks
Replies: 42
Views: 67267

Re: SpaceMouse Pro moves erratically in Solidworks

I had this same issue, and fixed it by clicking on the button to orient to isometric view, and then dimetric view. Somehow that reset where the 3D mouse was grabbing onto when rotating the part. Press "fit screen" to resets the issue. I have one button programmed on my mouse so it is fast...
by zazz
Sun Sep 01, 2019 8:37 am
Forum: Windows Discussion Forum
Topic: 3d connexion problem, part won't move smoothly
Replies: 17
Views: 44710

Re: 3d connexion problem, part won't move smoothly

I have the same problem. It started with SW 2018 SP0 and has been there since. If i right-click on the command manager for a meny, the rotation gets butter smooth again. I can also see the GPU work load increasing dramatically as well. Closing the menu and all gets jerky again. If i open up the shee...
by zazz
Sun Feb 17, 2019 7:51 pm
Forum: Windows Discussion Forum
Topic: SpaceMouse Pro moves erratically in Solidworks
Replies: 42
Views: 67267

Re: SpaceMouse Pro moves erratically in Solidworks

HI All, I just wanted mention that this bug is still around in 2017. I'm running Solidworks 2014 SP5.0 and a Spacemouse Wireless with the latest drivers (10.4.10 at time of writing). My problem is exactly what everyone else has described - my model behaves nicely for a while, then at some point sho...
by zazz
Sun Feb 17, 2019 7:40 pm
Forum: Windows Discussion Forum
Topic: Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .
Replies: 6
Views: 6538

Re: Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .

I see that the headline got wrong, The device i have is a SpaceMouse Pro, nothing else
by zazz
Sun Feb 17, 2019 7:38 pm
Forum: Windows Discussion Forum
Topic: Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .
Replies: 6
Views: 6538

Re: Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .

Oh, i forgot to say that rotation with the middle wheel button is very smooth... This must be a Spacemouse-to-Solidworks issue as the 3DC's demo is butter-smooth...

Am I alone to have this issue? And why no comments from 3Dconnection people?
by zazz
Sun Feb 10, 2019 8:58 am
Forum: Windows Discussion Forum
Topic: Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .
Replies: 6
Views: 6538

Re: Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .

Even moving the mouse around randomly makes the rotation smoother.

I have tried different driver and even with a different mouse and also with no mouse connected to the computer. But no change

I have the Latest driver 10.5.12.
by zazz
Sun Feb 10, 2019 8:32 am
Forum: Windows Discussion Forum
Topic: Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .
Replies: 6
Views: 6538

Solidworks: Rotation in part mode is very choppy - Spacepilot Pro .

I have kept my Spacepilot Pro in a drawer for the most of the time (6-7 years) as it has never been fully compatible with Solidworks, see https://www.3dconnexion.com/forum/viewtopic.php?f=25&t=9466&hilit=zazz Now i got a new computer so it was time to give the Spacepilot Pro another chance i...