Bingo! It works connected by cable, doesn't via Bluetooth.
I have a CADmouse Wireless, firmware 1.11
Moderator: Moderators
Also, why is mouse speed so different when I switch between cable and bluetooth? Even with the same speed settings parameters?
We don't know. Perhaps the system is blocking the communication between the driver and the device.
Yes sure, and it works.
Understood. In that case, what you are seeing is likely to be the difference between data rates. If I'm not mistaken, Bluetooth sends packets at around 100Hz and the cable connection can go up to 1kHz, a factor of ten larger. This faster data rate can be perceived as a difference in "speed" (how sensitive the device is).
You're right. I'm using cable only since yesterday in order to prevent that Edge issue with middle button.ngomes wrote: ↑Thu Oct 28, 2021 4:19 amUnderstood. In that case, what you are seeing is likely to be the difference between data rates. If I'm not mistaken, Bluetooth sends packets at around 100Hz and the cable connection can go up to 1kHz, a factor of ten larger. This faster data rate can be perceived as a difference in "speed" (how sensitive the device is).
If possible, could you explain the use case behind you regularly switching between a cable and wireless connection?
One of our assumptions (or, at least, my own) is that users of a wireless CadMouse will use the cable connection only when Bluetooth is disabled or otherwise unavailable. For normal, day-to-day usage, we expect customers to use the device wirelessly.
I'm having similar issues with Zbrush using this beta and already Monterey is out.slbaumgartner wrote: ↑Thu Oct 28, 2021 8:00 am Using the latest 3386 beta driver, after a brief period of normal operation SketchUp ceases to respond to the Space Mouse. Everything else about SketchUp still works normally, e.g. regular mouse and keyboard input, but the 3DC is dead. SketchUp also spins on quit and has to be force quit.
Neither of these happened with the previous beta driver.