SpaceMouse Buttons and NX 1980 do not work

Questions and answers about 3Dconnexion devices on Windows.

Moderator: Moderators

Post Reply
Pionono
Posts: 1
Joined: Wed Aug 11, 2021 3:45 pm

SpaceMouse Buttons and NX 1980 do not work

Post by Pionono »

None of the keys on my Spacemouse Pro wireless are not working on NX1980 except the "Lock rotation" one.
Everything else, Keys 1-4, the view keys (top, front, right, Fit) do not work.
For context, I am running NX version 1980, build 1700. And running 3DxWare 10.7.4.3350 software version.
Any help would be greatly appreciated, thank you!
luping
Posts: 941
Joined: Wed Mar 20, 2019 5:54 pm

Re: SpaceMouse Buttons and NX 1980 do not work

Post by luping »

When the NX application window is active and in CAD/modeling workbench/mode/module, press the 'MENU' button on your SpaceMouse Pro Wireless, then click the 'Buttons' to call out the 3Dconnexion button mapping panel, you can assign NX modeling commands to the 4 numbers at the left side of the window. Take number 4 for example, 3DxWare 10.7.4 supports NX 1980 initial release, then you should be able to assign NX command using the flyout window. In the flyout window, if NX 1980 is really supported, there should be a NX category of command for you to choose from a submenu of NX commands.

flyout window.jpg
flyout window.jpg (93.38 KiB) Viewed 2665 times
Post Reply