After upgrading from Rhino 3.0 to 4.0, I noticed that my Space Pilot doesnt do anything beyond rotate. I have lost the ability to configure my buttons, views, and worst of all, the "fit" button no longer works.
I have the latest drivers as well.
Is there any support for Rhino 4.0 lurking around the corner in a future driver release? If so, is it possible to make the 'delete' key mappable? I could never get it to map in Rhino 3.0.
Thanks
Stephen Shepard
CAD Designer
New Balance Athletic Shoe, Inc
190 Merrimack Street
Lawrence, MA 01843
Rhino 4.0 Support?
Moderator: Moderators
Hello Mr. Shepard,
There's a good chance they have changed the name of their executable again. If the driver doesn't load your Rhino configuration, open the Rhinoceros.scg file under en_us/profiles/default in the 3DxWare directory and change the EXECUTABLES name to rhino4.exe. Then restart the driver (and Rhino).
Let us know if this helps.
Jim
3Dx Software Development
There's a good chance they have changed the name of their executable again. If the driver doesn't load your Rhino configuration, open the Rhinoceros.scg file under en_us/profiles/default in the 3DxWare directory and change the EXECUTABLES name to rhino4.exe. Then restart the driver (and Rhino).
Let us know if this helps.
Jim
3Dx Software Development
-
- Posts: 3
- Joined: Fri Apr 06, 2007 7:09 am
Hey Thanks!
It worked out. One more quick question.... Is there a line that I can add somewhere in the Rhinoceros config file to possibly make the delete key able to be mappable to one of the top 6 buttons on my SpacePilot?
Thanks again,
Stephen Shepard
CAD Designer
New Balance Athletic Shoe, Inc
190 Merrimack Street
Lawrence, MA 01843
It worked out. One more quick question.... Is there a line that I can add somewhere in the Rhinoceros config file to possibly make the delete key able to be mappable to one of the top 6 buttons on my SpacePilot?
Thanks again,
Stephen Shepard
CAD Designer
New Balance Athletic Shoe, Inc
190 Merrimack Street
Lawrence, MA 01843
-
- Posts: 3
- Joined: Fri Apr 06, 2007 7:09 am
-
- Posts: 17
- Joined: Mon Sep 20, 2010 9:01 pm
huh?
[quote="jwick"]Hello Mr. Shepard,
There's a good chance they have changed the name of their executable again. If the driver doesn't load your Rhino configuration, open the Rhinoceros.scg file under en_us/profiles/default in the 3DxWare directory and change the EXECUTABLES name to rhino4.exe. Then restart the driver (and Rhino).
Let us know if this helps.
Jim
3Dx Software Development[/quote]
I just installed Rino 4.0, clean (no upgrade) and I am having no button support issues too. But I can't seem to find that folder to make these changes.
There's a good chance they have changed the name of their executable again. If the driver doesn't load your Rhino configuration, open the Rhinoceros.scg file under en_us/profiles/default in the 3DxWare directory and change the EXECUTABLES name to rhino4.exe. Then restart the driver (and Rhino).
Let us know if this helps.
Jim
3Dx Software Development[/quote]
I just installed Rino 4.0, clean (no upgrade) and I am having no button support issues too. But I can't seem to find that folder to make these changes.
Re: huh?
Hi Firebert85,
the configuration file for Rhino - Rhinoceros.scg - is located in the installation directory of the 3DxSoftware:
the configuration file for Rhino - Rhinoceros.scg - is located in the installation directory of the 3DxSoftware:
- C:\Program Files\3Dconnexion\3Dconnexion 3DxSoftware\3DxWare\en_us\profiles\default
Uta
3Dconnexion
3Dconnexion