Hi, I installed my new Enterprise and all was fine for a few hours. The next day the screen on the Enterprise was very disrupted and I could and still can only just read the application heading and non of the button operations. I have reinstalled the driver a number of times and have down graded the driver as suggested by some older posts on here. However it has been to no avail. Is the product faulty? Should I send it back to Amazon and get a new one or is this a driver issue?
Please get back to me as I have left some messages.
Regards
Ian
ENTERPRISE SCREEN VERY DISRUPTED USING VENTURA
Moderator: Moderators
Re: ENTERPRISE SCREEN VERY DISRUPTED USING VENTURA
Hi ngomes
I have posted a pic. I was in communication with the support from the main website and he asked me to use the 'Display" icon or button in the enterprise settings, however I do not have any such icon or button or anything that I can adjust the LCD screen with. I hope this helps.
I have posted a pic. I was in communication with the support from the main website and he asked me to use the 'Display" icon or button in the enterprise settings, however I do not have any such icon or button or anything that I can adjust the LCD screen with. I hope this helps.
Re: ENTERPRISE SCREEN VERY DISRUPTED USING VENTURA
It's difficult to tell what's being shown on the SpaceMouse Enterprise display. You may want to take a picture without the flash.
If you can, try using your SpaceMouse Enterprise on a Windows machine and see if the display works as expected.
My Technical Support colleagues may have been referring to a button on the "3Dconnexion Settings" program for Windows.
If you can, try using your SpaceMouse Enterprise on a Windows machine and see if the display works as expected.
Re: ENTERPRISE SCREEN VERY DISRUPTED USING VENTURA
Hi
thanks for your input, there is no flash on the camera - one can see a light reflected, which is the office light. However what you see is a true picture of the actual display. it is barely seen and very disrupted. unfortunately I do not have a windows machine that I use or in the household. Is that all the advice you may have? is it a hardware or software problem in your opinion?
Kind regards
Ian
thanks for your input, there is no flash on the camera - one can see a light reflected, which is the office light. However what you see is a true picture of the actual display. it is barely seen and very disrupted. unfortunately I do not have a windows machine that I use or in the household. Is that all the advice you may have? is it a hardware or software problem in your opinion?
Kind regards
Ian
Re: ENTERPRISE SCREEN VERY DISRUPTED USING VENTURA
I'm afraid so. The image is too poor to be able to tell anything.
That's what I was trying to determine when I asked for a picture but you can also try disconnecting and reconnecting the device with everything running.is it a hardware or software problem in your opinion?
If the display image comes back again as bad as before, I would think it is a hardware problem but -- I stress -- this is only an educated guess.
Re: ENTERPRISE SCREEN VERY DISRUPTED USING VENTURA
Thank you for your input, it’s been most useful. Kind regards
Ian
Ian