Cannot find 3DxMacWare driver on the website
Moderator: Moderators
-
- Posts: 20
- Joined: Thu Dec 03, 2009 1:41 pm
Cannot find 3DxMacWare driver on the website
Hi,
The 3DxMacWare driver is not available from the download drivers section of the 3dconnexions website: http://www.3dconnexion.com/service/drivers.html
I am trying to compile the 3DxValuesCocoa Mac OS X sample application, but can't do so since I don't have the Mac OS X driver installed.
I am using Snow Leopard 10.6.2.
Best regards,
Elvis
The 3DxMacWare driver is not available from the download drivers section of the 3dconnexions website: http://www.3dconnexion.com/service/drivers.html
I am trying to compile the 3DxValuesCocoa Mac OS X sample application, but can't do so since I don't have the Mac OS X driver installed.
I am using Snow Leopard 10.6.2.
Best regards,
Elvis
3DxMacWare driver on the website
Dear elvisjohndowson,
I had no trouble downloading 3DxMacWare 1.5.8 (23.3 MB). When you say it is 'not available', what is it that you are experiencing?
Sincerely,
Bryan G.
I had no trouble downloading 3DxMacWare 1.5.8 (23.3 MB). When you say it is 'not available', what is it that you are experiencing?
Sincerely,
Bryan G.
The more things change, the more they remain the same. ; ^ )
-
- Posts: 20
- Joined: Thu Dec 03, 2009 1:41 pm
-
- Posts: 20
- Joined: Thu Dec 03, 2009 1:41 pm
-
- Posts: 20
- Joined: Thu Dec 03, 2009 1:41 pm
-
- Posts: 20
- Joined: Thu Dec 03, 2009 1:41 pm
I tried the driver, and ran the sample cocoa app from the sdk, and the test application is able to get the values from all six controller axes.
The buttons and the LCD display manager dont work. It would be good if you could modify it to atleast switch off the LCD display, until a LCD SDK for the Mac becomes available. I don't want to burn in and damage the LCD display with prolonged use.
Since the SpacePilot Pro is your flagship model, don't you think it makes sense to release a full SDK, including the LCD applet SDK for Mac OS X?
The buttons and the LCD display manager dont work. It would be good if you could modify it to atleast switch off the LCD display, until a LCD SDK for the Mac becomes available. I don't want to burn in and damage the LCD display with prolonged use.
Since the SpacePilot Pro is your flagship model, don't you think it makes sense to release a full SDK, including the LCD applet SDK for Mac OS X?
Expected use for non-designated driver is unknown.
Dear elvisjohndowson,
In the 3Dconnexion Control Panel in the Configuration Drop Down we have an item to disable your LED, but that is about as close as we get. The driver is not designed for use with a PRO, so there would no LCD interface. What your PRO might or might be able to make use of in a driver not designed for it, is un-known.
Sincerely,
Bryan g.
In the 3Dconnexion Control Panel in the Configuration Drop Down we have an item to disable your LED, but that is about as close as we get. The driver is not designed for use with a PRO, so there would no LCD interface. What your PRO might or might be able to make use of in a driver not designed for it, is un-known.
Sincerely,
Bryan g.
The more things change, the more they remain the same. ; ^ )
-
- Posts: 20
- Joined: Thu Dec 03, 2009 1:41 pm