In Maya 2013, when I have an object in sub-object mode (vertex, face, edge, etc) and move the camera, that object gets deselected. This happens if I use my Space Pilot or the mouse, but goes away if I unplug the Space Pilot or unload 3DxMaya.mll.
I am on the latest drivers (3.16.3) and have tried a clean uninstall/reinstall of the drivers, deleting my Maya Prefs, and a full reinstall of Maya. None of these have helped.
One thing I have noticed is that when I move the camera (with mouse or Space Pilot) while 3DxMaya is loaded, the following commands are executed after the move: "autoUpdateAttrEd; updateAnimLayerEditor("AnimLayerTab"); statusLineUpdateInputField;" When 3DxMaya is unloaded, these commands do not run. Are they related to this issue?
Has anyone else run into this? How do I fix it?
Maya - objects in scene are deselected after moving camera
Moderator: Moderators
Re: Maya - objects in scene are deselected after moving came
After more searching, it looks like this issue is being investigated here: viewtopic.php?f=25&t=5107. I will follow this there.
Re: Maya - objects in scene are deselected after moving came
That post was from 2012.
You are using an outdated driver?
The currently supported driver is 3.17.8
Uninstall the driver you have.
Perform a clean install, the profiles may not work correctly with the newer driver.
http://www.3dconnexion.com/faq/28
You are using an outdated driver?
The currently supported driver is 3.17.8
Uninstall the driver you have.
Perform a clean install, the profiles may not work correctly with the newer driver.
http://www.3dconnexion.com/faq/28
Re: Maya - objects in scene are deselected after moving came
I have the EXACT same problem.
I am using the latest drivers (10.0.22) and have not have any other drivers installed.
Running Maya 2015, on a Dell T3610 with all ISV certified drivers, including the certified driver from Nvidia for Maya 2015.
Does anyone know of any work arounds? It is really slowing me down....
Thanks.
-Spo-
I am using the latest drivers (10.0.22) and have not have any other drivers installed.
Running Maya 2015, on a Dell T3610 with all ISV certified drivers, including the certified driver from Nvidia for Maya 2015.
Does anyone know of any work arounds? It is really slowing me down....
Thanks.
-Spo-
Re: Maya - objects in scene are deselected after moving came
Try the workaround from this link
viewtopic.php?f=25&t=5107.
viewtopic.php?f=25&t=5107.
Re: Maya - objects in scene are deselected after moving came
Hi
I have exactly the same problem and here is my config:
OSX Mavericks
Maya 2015
SpaceMouse Pro vith drivers v. 10.2.0
I will try to use the workaround in the other post...
I have exactly the same problem and here is my config:
OSX Mavericks
Maya 2015
SpaceMouse Pro vith drivers v. 10.2.0
I will try to use the workaround in the other post...