Hi 3Dconnexion. It would be awesome if all buttons and the wheel would be fully customizable.
I'm looking for combinations such as CTRL+mouse wheel and left / right swapped mouse buttons. I'm using two mice and when the lefthand mouse left / right is swapped through the standard mouse settings, this would allow using a CAD mouse as a right hand mouse and have the settings correct.
Please just let the user choose.
If that's already possible, please tell me how.
thanks
CAD-Mouse: All buttons fully customizable
Moderator: Moderators
-
- Posts: 2
- Joined: Wed Nov 19, 2014 11:11 am
Re: CAD-Mouse: All buttons fully customizable
Hi Martin,
Fantastic, this is exactly what i'm after too. Being able to customise the right click button.
Please.!
Fantastic, this is exactly what i'm after too. Being able to customise the right click button.
Please.!
Re: CAD-Mouse: All buttons fully customizable
You can swap the CM left and right buttons by editing the Base.xml file.
I have no way to add a modifier key to the mousewheel. You are talking about the wheel, not the button under the wheel, I assume.
Give me a scenario, so I can think about it.
Ctrl+MouseWheel is often used to zoom. It's hard to automate that because I don't know when you are done moving the mousewheel (to release the ctrl key). I'm not sure how well constantly pressing and releasing the ctrl key for every mousewheel tic would work.
You could assign one of the arrow keys on the CM to a Ctrl key to do all this in one hand. Doesn't sound user-friendly though.
I have no way to add a modifier key to the mousewheel. You are talking about the wheel, not the button under the wheel, I assume.
Give me a scenario, so I can think about it.
Ctrl+MouseWheel is often used to zoom. It's hard to automate that because I don't know when you are done moving the mousewheel (to release the ctrl key). I'm not sure how well constantly pressing and releasing the ctrl key for every mousewheel tic would work.
You could assign one of the arrow keys on the CM to a Ctrl key to do all this in one hand. Doesn't sound user-friendly though.
Re: CAD-Mouse: All buttons fully customizable
I don't think you can do that anymore entirely in our driver. You can't remap the right and left CM buttons.
You might be able to use the system mouse settings to assign the Right Mouse Button to MMB. Then use our GUI to assign the MMB to RMB. If our GUI doesn't do it, then you can edit the Base.xml file to assign HIDMouse_Right the CM's middle mouse button.
You are on your own when editing these files w/o the GUI.
You might be able to use the system mouse settings to assign the Right Mouse Button to MMB. Then use our GUI to assign the MMB to RMB. If our GUI doesn't do it, then you can edit the Base.xml file to assign HIDMouse_Right the CM's middle mouse button.
You are on your own when editing these files w/o the GUI.