CadMouse Pro Wireless & Monterey does not work
Moderator: Moderators
-
- Posts: 1
- Joined: Sat Oct 30, 2021 7:23 am
CadMouse Pro Wireless & Monterey does not work
Dear all, just received the box with CadMouse Pro Wireless and SpaceMouse.
Need your urgent advice as the mouse pointer does move but there is no action with left or right click.
Security is permission for the new mouse, Mac with Monterey rebooted twice but still does not work.
Frustration!
Mac 12.0.1 Monterey
3dconnexion Beta Version installed
I assume that the mouse can be used for all applications as well as Excel, Word and not only for 3D software.
Any advice is welcome and thanks
Rolf
Need your urgent advice as the mouse pointer does move but there is no action with left or right click.
Security is permission for the new mouse, Mac with Monterey rebooted twice but still does not work.
Frustration!
Mac 12.0.1 Monterey
3dconnexion Beta Version installed
I assume that the mouse can be used for all applications as well as Excel, Word and not only for 3D software.
Any advice is welcome and thanks
Rolf
Re: CadMouse Pro Wireless & Monterey does not work
Please confirm the CadMouse model that you have and how is connected to your Mac.Rolf the Wolf wrote: ↑Sat Oct 30, 2021 7:31 am CadMouse Pro Wireless [...] the mouse pointer does move but there is no action with left or right click.
No click action is a known issue with the original CadMouse (wired device) and the CadMouse Wireless but the CadMouse Pro Wireless is not known to be affected by that particular problem.
Also that the wireless CadMouse must be connected over Bluetooth on macOS 11 and newer (the included dongle is only supported on macOS 10.15 and older versions of the operating system).
Connecting your CadMouse over Bluetooth will probably fix the issue you're observing.
Nuno Gomes
Re: CadMouse Pro Wireless & Monterey does not work
I'm having issues with my spacemouse under Monterey, it is linked to the receiver, but it is not doing anything at all.
-
- Posts: 21
- Joined: Sat Apr 09, 2022 2:56 am
Re: CadMouse Pro Wireless & Monterey does not work
Is it still true? Is there any way to use the wireless CadMouse over the dongle with Monterey? The Bluetooth of the mouse is very very laggy on my M1Pro MacBook...
The mouse is unusable :/
-
- Posts: 21
- Joined: Sat Apr 09, 2022 2:56 am
Re: CadMouse Pro Wireless & Monterey does not work
Is it still true? Is there a way to make the wireless mouse work with the dongle in Monterey? The Bluetooth is very very laggy and the mouse unusable...
Re: CadMouse Pro Wireless & Monterey does not work
It won't work with the dongle. You need to use BT instead. I have the same setup and this is the workaround until 3DC fixes it.
-
- Posts: 2
- Joined: Mon Apr 25, 2022 12:15 pm
Re: CadMouse Pro Wireless & Monterey does not work
I have the Cadmouse Wireless and connected via Bluetooth on a Mac M1 running Monterey 12.3.1 and the mouse buttons are not working
The mouse is connected and is able to move/scroll.
I have installed 3DxWareMac_v10-7-0_r3411.dmg software package
The mouse is connected and is able to move/scroll.
I have installed 3DxWareMac_v10-7-0_r3411.dmg software package
-
- Posts: 2
- Joined: Mon Apr 25, 2022 12:15 pm
Re: CadMouse Pro Wireless & Monterey does not work
I have a Cadmouse Wireless connected via Bluetooth (not via dongle) to my Macbook M1 - Monterey 12.3.1
Installed the following software: 3DxWareMac_v10-7-0_r3411
Sadly the mouse only moves or scrolls but the mouse buttons don't work at all.
Ive googled and searched around for solutions which apparently are already around for a while.
Is there no fix for this and am I forced to get rid of this mouse again (which would be very unfortunate)?
Hoping for a positive answer
Regards
Installed the following software: 3DxWareMac_v10-7-0_r3411
Sadly the mouse only moves or scrolls but the mouse buttons don't work at all.
Ive googled and searched around for solutions which apparently are already around for a while.
Is there no fix for this and am I forced to get rid of this mouse again (which would be very unfortunate)?
Hoping for a positive answer
Regards
Re: CadMouse Pro Wireless & Monterey does not work
The device firmware may need to be upgraded. See here for more details.yvesfouquet4 wrote: ↑Mon Apr 25, 2022 12:18 pm I have the Cadmouse Wireless and connected via Bluetooth on a Mac M1 running Monterey 12.3.1 and the mouse buttons are not working
-
- Posts: 21
- Joined: Sat Apr 09, 2022 2:56 am
Re: CadMouse Pro Wireless & Monterey does not work
Can someone @ 3DConnexion TEST and say something about the mouse giant LAG via bluetooth?
-
- Posts: 6
- Joined: Mon May 02, 2022 3:53 pm
Re: CadMouse Pro Wireless & Monterey does not work
I've dealt with this kind of company before. They aren't going to do a damn thing because the owner has the last say on everything and they are likely a **********.constellation wrote: ↑Tue May 03, 2022 1:13 am Can someone @ 3DConnexion TEST and say something about the mouse giant LAG via bluetooth?
Moderator edit (May 3, 2022): removed foul language (see BOARD RULES under "Be respectful").
-
- Posts: 21
- Joined: Sat Apr 09, 2022 2:56 am
Re: CadMouse Pro Wireless & Monterey does not work
I agree.
MAC USERS, AVOID 3D CONNEXION HARDWARE: IT'S NOT SUPPORTED AS STATED.
MAC USERS, AVOID 3D CONNEXION HARDWARE: IT'S NOT SUPPORTED AS STATED.
Re: CadMouse Pro Wireless & Monterey does not work
You agreed to the '3DCONNEXION SOFTWARE LICENSE AGREEMENT' to install the 3DxWare driver, there's the alert 'IMPORTANT: READ THIS NOTICE BEFORE USING THE SOFTWARE', read carefully section 5, 6, 7 of the license agreement!laserwaves wrote: ↑Tue May 03, 2022 6:27 amI've dealt with this kind of company before. They aren't going to do a damn thing because the owner has the last say on everything and they are likely a **********.constellation wrote: ↑Tue May 03, 2022 1:13 am Can someone @ 3DConnexion TEST and say something about the mouse giant LAG via bluetooth?
Moderator edit (May 3, 2022): removed foul language (see BOARD RULES under "Be respectful").
Re: CadMouse Pro Wireless & Monterey does not work
CadMouse wireless working on my Mac Monterey with Apple silicone.
How ? Please follow the instructions on this link.
https://3dconnexion.com/uk/support/faq/ ... ick-macos/
How ? Please follow the instructions on this link.
https://3dconnexion.com/uk/support/faq/ ... ick-macos/
MTHD AC24 & CAX10
HP W10 & ASM M1
CadMouse Wireless
HP W10 & ASM M1
CadMouse Wireless