after installing the latest drives, and with a fresh MACOS installation
System:
MACOS: 10.13.3
MacBook Pro 15" 2016 (MacBookPro13,3)
CADMouse:
connected via RF dongle
3Dconnextion Driver: 10.5.2 (MAC)
Working OK on windows with RF dongle or BT
After installation and with system extension unlocked, like explained here on the FAQ: https://www.3dconnexion.com/index.php?i ... d=faq/1127
Only the point shows, but no even one of the clicks register.
The mouse RF adaptor show on system report:
3Dconnexion Universal Receiver:
ID do produto: 0xc652
ID do fabricante: 0x256f
Versão: 1.01
Velocidade: Até 12 Mb/s
Fabricante: 3Dconnexion
ID da localização: 0x14420000 / 7
Corrente disponível (mA): 500
Corrente necessária (mA): 98
Corrente adicional em funcionamento (mA): 0
Any clue on this?
Cadmouse wireless - pointer moves but no clicks
Moderator: Moderators
Re: Cadmouse wireless - pointer moves but no clicks
Hi Jorge_rui,
have you tried different USB ports?
Does it work when connected with the cable?
have you tried different USB ports?
Does it work when connected with the cable?
Uta
3Dconnexion
3Dconnexion
Re: Cadmouse wireless - pointer moves but no clicks
Diferente USB port does not seem to have any effect.
With cable conection does not seem to have any effect either.
Only the pointer moves.
With cable conection does not seem to have any effect either.
Only the pointer moves.
Re: Cadmouse wireless - pointer moves but no clicks
I've taken the courage, and reformatted the MAC, and reinstalled the 3Dconnexion drivers,
What I have found is that the system does not ask me for permission to unlocked extension...
I'm using the current drivers
What I have found is that the system does not ask me for permission to unlocked extension...
I'm using the current drivers
Re: Cadmouse wireless - pointer moves but no clicks
I've manage to figured out what's the problem and now it's working, the problem is on 3Dconnexion side, strange that no one noticed this, since it is impossible to make it work with the normal instalation procedure.
Re: Cadmouse wireless - pointer moves but no clicks
I have a similar issue with a wired cadmouse after installing macOS 10.13.4
Macbook pro retina mid 2012. Apple 27" thunderbolt display.
Mouse cursor moves and scroll button works. Clicking on any button produces no response.
Macbook pro retina mid 2012. Apple 27" thunderbolt display.
Mouse cursor moves and scroll button works. Clicking on any button produces no response.
Re: Cadmouse wireless - pointer moves but no clicks
Hi Jorge_rui,
you might be wrong with pointing to 3Dconnexion. It could be that you have a problem that is discussed here: https://discussions.apple.com/thread/8087342.
Note that the issue with the kernel extension is not 3Dconnexion specific - it applies to all 3rd party kernel extensions.
Uta
3Dconnexion
3Dconnexion
Re: Cadmouse wireless - pointer moves but no clicks
Uta
3Dconnexion
3Dconnexion