3Dconnexion Forum

It's the device.

I've went ahead and tested the board below the mouse which accepts all inputs and outputs.

Moving around the mouse I can measure data coming in too, the problem seems to lie between the connector of the knob and the board, I'm going to have a look at that but I think I can fix this.

Well, I've went ahead and shrunk one of my volumes on my machine to install Windows 10 to the side, installed to the latest version of Windows 10, started out with a legacy windows 10 X64 driver supported for the SpaceNavigator, same problem occurred, upgraded to the latest version of the driver and...

The SpaceNavigator fine works on Windows 11. It is greyed out in the GUI to indicate it is no longer "officially supported". Most importantly it is not tested anymore. Though some of us still use it--in fact I was using one last week. It could break. Fair warning. But it is not currently ...

Yes I do actually, plenty. Logitech to name one of them, Thrustmaster with their flightsticks, any device that's older than 10 years old and still works due to the fact the vendor doesn't break the functionality of the device under the pretense it's no longer supported, all the sensors work, the dri...

I know lots of people are willing to upgrade software and footing the huge licence fees/subscription fees of the commercial software in the range of thousands of USD/Euros, but are unwilling to pay for the hardware upgrade within the range of 150-300 USD. I appreciate their value of human service b...

I know lots of people are willing to upgrade software and footing the huge licence fees/subscription fees of the commercial software in the range of thousands of USD/Euros, but are unwilling to pay for the hardware upgrade within the range of 150-300 USD. I appreciate their value of human service b...

Why not downgrade Windows 11 to Windows 10? If your Windows operating system licence is a retail FPP(Full Packaged Product). Because that recovery option is gone, I'm also dependent on DirectX12 on this machine so downgrading it again to just use 1 USB device is kind of far fetched while the proble...

Hi all, I'm at a loss, I've tried everything but ever since upgrading to Windows 11 my mouse has stopped functioning. What I can see in the feedback meter in the Connexion Trainer is that Pan L/R Zoom and Spin are picked up fine, but Tilt, Roll and Pan U/D are not. This problem does not rely in the...

Hi all, I'm at a loss, I've tried everything but ever since upgrading to Windows 11 my mouse has stopped functioning. What I can see in the feedback meter in the Connexion Trainer is that Pan L/R Zoom and Spin are picked up fine, but Tilt, Roll and Pan U/D are not. This problem does not rely in the ...

Well considering the lack of replies it's probably not an easy fix.

I have phoned up an electronics expert in my vicinity and he told me he's going to try and open it up and clean the sensors by taking away the solder from the springs.

Keeping this forum updated.

Hi Guys, So far I've poured some alcohol in it and shook it around, but the problem remains, Roll and tilt are only functional when the U/D is pressed all the way down, the U/D sensor only registers when the spacemouse is all the way down too, I'm at my wits end and really want to have this fixed. I...

Just opened up the SpaceNav, looked around but couldn't get inside the button itself or else i'd have to cut through the springs which I rather not, when putting it back together the Pan U/D Tilt and Roll inputs completely stop working alltogether.. maybe a broken wire? I'm not sure about the elektr...

Hi, I'm having a problem with my Space navigator and I would like some help. So far what I've learned from the feedback meter in the 3d Connexion trainer is that the Pan U/D sensor is unreliable, it's either fully up or down and I have to press it all the way down for it to switch down, when it's in...