Space Pilot Pro display screen

[tongy66086]

I have apparently clicked, or checked something that has changed the display screen on my spacepilot pro from the command screen to the part information screen.
How do I switch it back to show the commands?
Thanks again for your help.

[Bryan]

Dear tongy66086,

I'm not quite sure what you're identifying as the 'command' screen and the 'part information' screen. But possibly the second key on the right side of the PRO's color LCD screen with a rectangular symbol with a gear symbol in its lower right hand corner. That seems to swtich between the main menu and the button mappings.

Sincerely,
Bryan

[tongy66086]

I had shut off, and restarted, my machine 3 times before posting the message.
When I came in on Monday, it was back to the normal I know.
What I was referring to as the "command screen" was when it shows the 5 buttons, with the 10 commands, that changed depending on whether I was in the part, assembly, or drawing mode.
What i meant by "part information" was where it displayed the information on the part, assembly, or drawing. (drawn by, drawn date, drawing size, etc.)
I still have no idea what I had done to make the display change, and why it didn't change when I shut the computer off, but it does appear to be working correctly now.
I do appreciate your help.

Dear tongy66086,

I'm not quite sure what you're identifying as the 'command' screen and the 'part information' screen. But possibly the second key on the right side of the PRO's color LCD screen with a rectangular symbol with a gear symbol in its lower right hand corner. That seems to swtich between the main menu and the button mappings.

Sincerely,
Bryan