Hello,
I have a SpacePilot Pro and I installed the latest drivers for windows 7 from website of 3Dconnexion. I use it in my Polyworks workspace and I configure additional function keys and all keys (like <ctrl>+<shift>+E, <ctrl>+C ext.) are working well. I have only one problem in setting key <shift>+delete, I set it, but it works like delete ONLY. when I press <shift> on Space Pilot and Delete on keyboard it works well, but it makes no sense for me. What should I do in case like this?
Best regards,
Vlad
Question about key sequence
Moderator: Moderators
Re: Question about key sequence
Hi Karper1986 -
It's because <shift>+delete is a Windows command rather than an application command. The other shortcuts are ones that work inside Polyworks. Mapping a keyboard combination sends the command to the application rather than to Windows.
The <shift> on the Space Pilot and Delete on the keyboard combination you're using is a good workaround for that.
------------
Barbara
It's because <shift>+delete is a Windows command rather than an application command. The other shortcuts are ones that work inside Polyworks. Mapping a keyboard combination sends the command to the application rather than to Windows.
The <shift> on the Space Pilot and Delete on the keyboard combination you're using is a good workaround for that.
------------
Barbara
-
Karper1986
- Posts: 3
- Joined: Mon May 13, 2013 7:05 am
Re: Question about key sequence
Thank you Barbara for such quick answer 