Wrong zoom direction in 2d application

[cacciatorino]

Space Navigator, Driver 10.2.3, Windows 7-x64.

I'm using the following cad application:

1) solid edge
2) solidworks
3) Cocreate Direct/Modeling

The 3d mouse works as expected with solid edge and solidworks, but I have this issue in CoCreate Modeling:

Zoom axis direction is ok on the 3d module (push forward to zoom out, pull backwards to zoom in) but it works reverse in 2d drafting module. If I try to reverse the zoom direction in the 2d module, than it reverses in the 3d module too, so I cannot find a satisfactory setup.

My collegue has the same setup on his workstation (both operating system and cad programs), but no problem at all.

Is there something that I can do to correct the behaviour of the 3d device?

[UtaSH]

Hi cacciatorino,

maybe something got messed up with your settings in Creo Direct / Modeling. I can only give instructions how to reset the settings for the 3D mouse, but i might be something within Direct/Modeling and I don't know how to reset this.

You can find in FAQ #1100 how to reset the configuration for your 3D mouse. Let me know what you find out.